Standard · United Kingdom

BS 5852: what it tests and what it means for FR finishing

BS 5852:2006 Methods of test for assessment of the ignitability of upholstered seating by smouldering and flaming ignition sources

In short: BS 5852 is the BSI method for the ignitability of upholstered seating by smouldering and flaming ignition sources. In the UK, the Furniture and Furnishings (Fire) (Safety) Regulations 1988 cite it for the cigarette test, the match test on visible covers and the crib test on polyurethane foam.

What BS 5852 covers

BSI describes BS 5852:2006 as assessing covers and fillings, or complete seating, against a smouldering cigarette or flaming ignition sources such as burning matches; the apparatus includes a cigarette, butane gas flames and flaming wooden cribs. BSI marks the 2006 edition as current; it replaced BS 5852:1990. The full standard is sold by BSI, so this page does not quote numerical pass/fail limits.

How the UK regulations use it

Requirement in the 1988 Regulations What it calls for
Regulation 5, Schedule 4 Cigarette test for upholstery (except mattresses, bed-bases, pillows and cushions): the smouldering cigarette test in BS 5852: Part 1, as modified
Regulation 8, Schedule 5 Match test for any visible part of the permanent cover: BS 5852: Part 1 provisions for butane flame ignition source 1
Regulation 6, Schedule 1 Filling materials; polyurethane foam in slab or cushion form tested with an ignition source 5 crib under BS 5852: Part 2
Schedules 4 and 5 Water-soaking procedure before testing when the cover is treated with a fire-retardant chemical

An amendment, the Furniture and Furnishings (Fire) (Safety) (Amendment) Regulations 2025, came into force on 30 October 2025. According to the Office for Product Safety and Standards, it changed scope for certain baby and children’s products, display labels and the time limit for legal proceedings, not the test methods above.

What this means for the finisher

  • Ask which ignition sources the buyer requires. “BS 5852” alone does not say.
  • If you use a chemical finish on the cover, plan for the water soak before testing; choose chemistry with that in mind.
  • Back-coating is a common route for upholstery covers. Our FR-5852 (synthetics) and FR-T235 (cotton and natural fibers) are designed with BS 5852 in mind; FR-S01 is a semi-durable cotton finish designed to resist a soak test.

Related reading: TB 117-2013 vs the UK furniture fire tests.

Frequently asked questions

Is BS 5852 the same as the UK furniture regulations?

No. BS 5852 is a BSI test-method standard. The legal requirements for domestic upholstered furniture supplied in the UK are in the Furniture and Furnishings (Fire) (Safety) Regulations 1988, which cite BS 5852 Part 1 and Part 2 for specific tests.

Does a fire-retardant-treated cover have to be soaked before testing?

Under Schedules 4 and 5 of the 1988 Regulations, a covering fabric treated with a fire-retardant chemical goes through a prescribed water-soaking procedure before the cigarette and match tests.

Which ignition source is used for the match test?

Schedule 5 of the 1988 Regulations refers to the provisions of BS 5852: Part 1 that relate to butane flame ignition source 1.

Sources

  1. BSI Knowledge: BS 5852:2006 product page
  2. The Furniture and Furnishings (Fire) (Safety) Regulations 1988, S.I. 1988/1324 (legislation.gov.uk)
  3. Schedule 4: The Cigarette Test
  4. Schedule 5: The Match Test
  5. Schedule 1: polyurethane foam, ignition source 5 crib
  6. OPSS: Furniture and Furnishings (Fire) (Safety) (Amendment) Regulations 2025

Sources last checked: 12 November 2026.

This page summarises public information for orientation. It is not legal advice and does not replace the official text; always work to the edition your buyer or authority specifies.

Products designed with BS 5852 in mind

Finishing a fabric for BS 5852?

Send the fiber, fabric weight, finishing route and the method your buyer names. We reply with a TDS and a suggested starting point for your lab trial.