Standard · France

French M1 (NF P92-503 / NF P92-507): what it tests and what it means for FR finishing

French M classification (NF P92-507) and the electric burner test for flexible materials (NF P92-503)

In short: M1 is the best class for combustible materials in the French M classification ("combustible, non inflammable"). The classification is defined by NF P92-507; flexible materials are tested with the NF P92-503 electric burner test.

The M classification in brief

According to the French testing laboratory LNE, products are classified into levels by combustibility and flammability: M0 incombustible; M1 combustible, non inflammable; M2 combustible, hardly inflammable; M3 moderately combustible and inflammable; M4 highly combustible and easily inflammable.

  • NF P92-507 (2004) is the classification standard: it defines which tests apply and the criteria for each class.
  • NF P92-503 is the electric burner test used for flexible materials such as fabrics: specimens of 180 mm × 600 mm are stretched on a frame on an inclined support and exposed to a radiant heat source while a flame sweeps the product intermittently.

M classification vs Euroclasses

The LNE guide notes that two systems coexist in France. The M classification applies to interior fitting products and to products not covered by a harmonised European standard; Euroclasses under NF EN 13501-1 are mandatory for construction products covered by a harmonised standard. See our EN 13501-1 page.

Products

FR-T300 (halogen-containing slurry for roller blinds) is aimed at M1 and NFPA 701. Confirm with a test on the finished fabric.

Frequently asked questions

What does M1 mean?

In the French M classification, M0 is incombustible and M1 is "combustible, non inflammable", followed by M2 to M4 for increasingly flammable materials, according to the LNE guide.

Is M1 the same as a Euroclass?

No. The LNE guide explains that two systems coexist in France: the M classification (NF P92-507) for interior fitting products and products not covered by a harmonised European standard, and Euroclasses (NF EN 13501-1), which are mandatory for construction products covered by a harmonised standard.

Sources

  1. LNE (Laboratoire national de métrologie et d'essais): Guide, Classement M (PDF, in French)

Sources last checked: 15 November 2026.

This page summarises public information for orientation. It is not legal advice and does not replace the official text; always work to the edition your buyer or authority specifies.

Products designed with French M1 (NF P92-503 / NF P92-507) in mind

Finishing a fabric for French M1 (NF P92-503 / NF P92-507)?

Send the fiber, fabric weight, finishing route and the method your buyer names. We reply with a TDS and a suggested starting point for your lab trial.